The Easiest Ways To Get Soap Out Of A Carpet

Alex Mcil author
Alex Mcil

Cleaning a carpet is never an easy task, whether it be ink stains or stains from spilled food or wine. After a lot of time and energy cleaning up the stains from the carpet, it always breaks our hearts when we end up with soap stains on the carpet. Additionally, frequent shampooing and cleaning of carpets can also lead to soap stains to occur, especially if they haven’t been rinsed out properly. It is important that these sop residues are removed as soon as possible, as the soap chemicals will dilute the dyes of your carpet and weaken the fabric fibers and even the floor beneath. 

Thankfully, there are various ways that are proven to work that can remove those soap stains from our precious (and sometimes expensive!) carpets.

What You Will Need

You will need to prepare a couple of items in order to clean these stains out of your carpet. Make sure that you have some clean, dry towels, and some hot water. Prepare some vinegar and a fan as well. Some floor cleaner machines can be used as well. If you have them, a wet/dry vacuum and a steamer would be extremely useful as well!

Sponging and blotting the carpet

This method is more like a ‘spot treatment’ of a carpet and is best suited for those who have carpeted floors that can’t be removed. 

You will need a bucket that can hold a gallon of water and a gallon of equal parts vinegar and hot water. Then, add a cup of white vinegar. Next, get a towel or cloth or sponge and soak it in the mixture, and then place it on the affected area on the carpet. Allow it to soak for a bit, and then remove and replace it with another dry towel. You will want to repeat this process until the stain has been lifted off the carpet. After the stain has been removed, use a fan or a wet/dry vacuum to dry the area of the carpet.

Cleaning a Wet Spill

A wet spill means that a soap spill is recent and the carpet is still wet. In this instance, we want to remove as much soap at the start of the cleaning process. To do this, cover the affected area of the carpet with a clean and dry towel. This will remove the excess surface soap on the carpet and reduce the amount of work you will have to do later.

Even after this, there will be some soap residue remaining on the carpet that soaked into the fibers. In order to remove this, we need to dilute the soap and soak it up in order to remove it from the carpet. You will want to put a towel soaked in warm water over the spill, and apply light force throughout the affected area. Doing so will help to absorb the soap left on the carpet. After that, you will want to wring out the cloth and wash it with clean water, and then wring it again in order to remove any soap on the towel. You will then reapply the damp towel onto the area and repeat this process until you can no longer get any more soap out of the carpet. You can tell once you’ve removed most of the soap once there are no longer any soap bubbles foaming on the carpet surface. 

Once that is done, we will need to dry the carpet. It is important that you dry the carpet so as to prevent mold and mildew from growing on the flooring or the carpet. Use a fan and point it at the affected area, or use a wet/dry vacuum cleaner if you have it. 

Cleaning a Dry Spill

A dry spill occurs when the soap has dried onto the carpet and is not entirely visible, but leaves a faint mark. In order to get rid of these types of stains, we first need to rehydrate the soap with warm water and get it back into a liquid form.

Next, we will be using vinegar to neutralize the soap, which allows it to be absorbed faster. For this, we recommend that you use a towel soaked in a water-vinegar solution and place them over the stained areas of the carpet. Alternatively, you can use a spray bottle filled with the solution and spray it over the area. We want to soak the soap into the carpet rather than have it dry and crust on the surface of the carpet. Repeat this process until there is no longer any foaming or bubbles caused by the soap. This means that the soap has been fully absorbed into the carpet. 

Next, you would want to put more warm water onto the area of the carpet to dilute the soap further. Lastly, you will leave the carpet to dry. A dry towel or cloth to soak up any of the excess liquid, or hang it in to dry with a fan pointed at it, which we recommend. If you have it, you can also use a wet/dry vacuum to ensure that no liquid is left on the carpet. 

It is important that you check the material of your carpet before applying vinegar to it, however. If your carpet is made of silk, wool, or other natural fibers, you should avoid using vinegar and use only water or special cleaning products. Just use a good vacuum cleaner to seal the deal.


These are some of the most effective ways to clean a carpet. It is very important to check if your carpet is made out of materials that are not suitable to be used with vinegar before applying. This is to prevent any dyes from being diluted or having their fibers weakened. It is important to also note that some stains may end up being permanent if they have not been cleaned fast enough. That is why it’s important to clean a stain as fast as possible.

If you’re unsure if your carpet is safe to clean with these methods or if the stain doesn’t lift, and you’d like to seek professional help, there are professional carpet cleaning services. Most services charge anywhere from $25 to $75 to clean a room. The cost is dependent on how much care is needed to clean them.

1. What are some easy ways to get soap out of a carpet?

There are a few easy ways to get soap out of a carpet. One way is to use a vacuum cleaner with a hose attachment. Another way is to use a carpet cleaner or shampooer. Another way is to use a mixture of warm water and dish soap.

2. What are some common causes of soap buildup in carpets?

Soap buildup in carpets is most often caused by using too much detergent when cleaning the carpet, or by using a detergent that is not designed for use on carpets. Over time, the soap will build up and become trapped in the carpet fibers, causing the carpet to become stiff and difficult to clean. In some cases, soap buildup can also lead to the growth of mold and mildew in the carpet.

3. How can I prevent soap buildup in my carpet?

If you have soap buildup in your carpet, there are a few things you can do to prevent it from happening again. First, make sure you rinse your carpet thoroughly after shampooing it. You can also use a carpet protector or sealant after shampooing to help keep soap from seeping into the carpet fibers. Finally, be sure to vacuum regularly to remove any soap residue that may have accumulated on the surface of the carpet.

4. What are some common carpet cleaning mistakes that can cause soap?

One common carpet cleaning mistake that can cause soap buildup is using too much detergent. When too much detergent is used, it can leave behind a soapy residue that can attract dirt and dust, leading to a dull and lifeless appearance. Another common mistake is not rinsing the carpet thoroughly after cleaning. This can also cause a soapy residue to remain on the carpet, which can attract dirt and dust.

5. How can I tell if my carpet has soap buildup?

If your carpet has soap buildup, it will likely feel stiff and crunchy when you touch it. The fibers may also appear matted and dull. You may also notice that your vacuum cleaner isn’t working as well as it used to on your carpet. To test for soap buildup, mix a solution of one part vinegar and one part water. Apply the solution to a small area of the carpet with a cloth and rub gently.

6. What are the consequences of leaving soap in my carpet?

If you leave soap in your carpet, it will eventually attract dirt and become grimy. Over time, the soap will break down the carpet fibers and cause them to become matted and discolored. In extreme cases, the soap can even eat away at the backing of the carpet, causing it to delaminate. If you have children or pets, they may be tempted to play with the soap, which can lead to them ingesting it and becoming sick.

7. What are some professional carpet cleaning tips for removing soap buildup?

There are a few professional carpet cleaning tips for removing soap buildup. First, it is important to identify the source of the soap buildup. This can be done by looking for soap scum on the carpet fibers or by testing the pH of the carpet. If the carpet is alkaline, it is likely that soap buildup is the problem. Second, it is important to vacuum the carpet thoroughly to remove any loose soap particles.

8. How can I make my own carpet cleaning solution for removing soap?

There are a few things you will need in order to make your own carpet cleaning solution for removing soap buildup. You will need white vinegar, water, dish soap, and baking soda. You will also need a spray bottle and a scrub brush.
First, mix together 1 cup of white vinegar, 1 cup of water, and 1 tablespoon of dish soap. Pour this mixture into the spray bottle.

9. What are some common myths about removing soap from carpets?

There are many common myths about removing soap from carpets, but the most prevalent one is that using hot water will cause the soap to set and become more difficult to remove.