How To Use Vacuum Cleaner As Blower

Alex Mcil author
Alex Mcil

We all want to get rid of leaves, dust, and other waste quickly from our homes, yards, or gardens. Vacuuming them up is too difficult for several reasons. Plus, the dampness and nature of the exterior debris may cause damage to vacuum cleaners.

The best way to rid of this quickly is to use a leaf blower. But they are a bit pricey. Today, we will show you how to do using a vacuum cleaner instead of an expensive piece of equipment.

why convert a vacuum into a blower?

Why Should You Use Your Vacuum Cleaner As A Blower?

You can even utilize the latest hardwood floor machine types as blowers. They provide a blower function in addition to their regular suction power. Utilizing them as a blower will assist in dislodging dust particles that tend to accumulate in hard-to-reach regions of your home, such as the top edges of doors and windows. Additionally, you may use this feature to clean the inside of your computer’s hard drive, CPU, and other areas that collect a lot of dust but are difficult to clean.

For example, an air conditioner is only utilized during the summer and is left unused for several months during the winter, accumulating a significant amount of dust during this period of inertia. It becomes a haven for dirt, dust, spiders, and dust mites during these times.

Here, employing a vacuum cleaner as a blower comes in handy for cleaning up the mess created when the sun shines and you resume using it. Additionally, antique furniture collects a lot of dust and is frequently unable to be cleaned entirely with the suction strength of a vacuum cleaner. As a result, you can dislodge this dust with the blower function and subsequently clean it with a towel or broom.

The Advantages Of Using A Vacuum Cleaner As A Blower

Along with removing accumulated dust and debris, the blower action speeds up the drying process on wet surfaces. You can clean both dry and damp areas of your home without changing the filter because there will be no intake. You can use it outside to disperse dirt and dust. This feature enables you to clean big volumes of dirt and dust, which is not always achievable with a vacuum cleaner’s suction feature. To learn more about How to Use a Vacuum Cleaner, click here.

How To Modify A Vacuum Cleaner To Use As A Blower

If you don’t have a leaf blower or a vacuum cleaner with an obvious blower function for blowing out dust and debris from your house, lawn, garden, or garage, you can still clean up the problem with a standard vacuum cleaner. To convert your vacuum cleaner into a leaf blower, follow these simple steps:

1. Determine the Type of Vacuum You Have

Before you can learn how to reverse the airflow of a vacuum cleaner, you must first determine the sort of vacuum you own. It is not the same a water filter vacuum cleaner vs a hepa.

Converting your vacuum cleaner into a blower is an excellent solution if you are unable to afford an actual blower and simply require compressed air for little jobs around the house.

There are numerous varieties of vacuum cleaners, but the best for reverse engineering into blowers are bag vacuum cleaners and canister vacuum cleaners.

Modern household vacuum cleaners have dispensed with bags in favor of plastic cylinders equipped with filters. A bag-style vacuum cleaner is the simplest item to use as a makeshift blower. However, bag vacuums, plastic canister vacuums, and shop vacs may all be easily converted to blowers.

2. Assemble the Appropriate Equipment

Though the procedure of converting your vacuum to a blower is rather straightforward, there are a few things you should prepare in advance. Ascertain that you have all of the necessary equipment before disassembling your vacuum to avoid causing any extra damage. Prior to beginning, you will require the following items:

  • The owner’s manual for your vacuum cleaner
  • The right type of screwdriver
  • Duct tape

The most critical item to have on hand is the user manual for your vacuum cleaner. If you cannot locate your paper copy, the majority of instructions are available online. Before you begin, read the directions for disassembling your vacuum. This will assist you in familiarizing yourself with the position of specific pieces, as each vacuum is built differently.

3. Take All Necessary Safety Precautions

Always disconnect your vacuum cleaner prior to disassembly to avoid electrocution. Additionally, this will keep you from unintentionally turning on your vacuum while working on it and blowing dust everywhere. Additionally, take care not to break any elements, as the majority of vacuum cleaners have numerous small components.

If you need to determine airflow, do so prior to disassembling your vacuum. Because you may be using your blower outside, keep your cord away from any bodies of water to avoid electrocution or short-circuiting. Always be aware of the location of the cord. Avoid nicking or cutting your vacuum’s power cord during disassembly.

4. Converting Your Vacuum Bag to a Blower

A classic vacuum with a material bag connected to a hose, rather than a plastic container, will be the simplest to convert to a blower. After unplugging your vacuum and familiarizing yourself with its handbook and parts, follow these steps:

  1. Unzip the lining of the vacuum bag and detach the interior vacuum bag from the vacuum’s intake hole.
  2. Switch on your vacuum and let it blow out any remaining debris. Consider shaking it slightly to dislodge any buildup.
  3. With duct tape, tightly seal and secure a flexible vacuum tube to the intake hole where the vacuum bag was separated.
  4. Inflate Something Narrow Using Your Bag Blower
  5. If you do not have an air pump, you can inflate items using your vacuum’s blower function. However, if you intend to use your vacuum to fill something with a narrow air entrance, such as an air mattress, you must take further precautions to ensure your vacuum hose fits properly.
  6. Make a cut down the middle of a plastic bottle and use the half with the spout and cap.
  7. Remove the cap and secure the bigger end of the flexible vacuum tube with duct tape.
  8. You can wrap additional duct tape over the bottle’s lip to form a tighter barrier around the item’s entry.

How To Convert Your Canister or Shop-Vac Vac to a Blower

Most modern homes have both a traditional vacuum and a bagless vacuum with a plastic cylinder, internal filter, and flexible suction line. These work on both carpets and hard surfaces. Shop vacs are very popular for companies and residences.

Some vacuums and shop vacs have a switch that instantly switches the airflow from sucking to blowing. Others will contain instructions in the handbook for turning the device into a blower. With or without these features, you can still modify the airflow.

  • Remove the Vacuum’s Motor
  • After unplugging your vacuum, dismantle it to access the motor. Remove the housing to do so. This part will likely require a screwdriver. After reversing the airflow, remember to replace the motor.
  • Remember that each vacuum is unique.
  • Read the user guide first.

Unplug the motor from the vacuum by unplugging the wires. To access this spot, remove the protective foam shell. The connection point will be where the wire lines are broken, often by a red or black connector.

Canister Vacuum

A regular vacuum has two primary airflow sections: a hole at the base that collects material and an opposite end that blows air into a collection bag or container. A flexible suction tube must be linked to the opening that sucks the air out, like with bag vacuums.

Steps for converting plastic canister style vacuums:

  • Unplug vacuum
  • Disconnect the hose that filters debris into the bin. This is frequently clamped or twisted on tightly.
  • Bring the vacuum outside and restart it. Let it run to blow out debris. Once clean, your vacuum will act as a blower.

The flexible hose may reverse vacuum cleaner airflow. If you want to utilize the blower to inflate something, duct tape a water bottle like an upright bag vacuum. Simply replace the nozzle to resume vacuuming.

Shop vacuum cleaner

Because shop vacs are meant for use in larger industrial settings, unlike a regular vacuum cleaner, they are usually designed with both suction vacuuming and outward blowing in mind. Having a reverse flow button on these machines isn’t always necessary. Here are the steps to convert your shop vacuum into a blower:

  • Unplug your shop vac.
  • Remove the hose that is flexible. Unlatching a clamp or simply pulling straight out are the most common methods. To avoid injury, see your owner’s manual.
  • Using the other end of the exhaust cap, remove it. Once again, consult your instruction manual if you are unsure of how to remove it.
  • The flexible hose should be inserted into the hole where the exhaust cap was removed.
  • A latch will be located on each end of your suction line if your shop vac was designed with blowing in mind. There are holes for both intake and exhaust, so this will allow it to be attached.